shelly.guide Unofficial
  1. Home
  2. Installations

Overview

Installations

Complete installations from wiring to app setup, one use case per guide.

Lighting control with ShellyWired first, wireless where no wire can go — and the settings that decide how the light feels. Dimming with BLU Wall SwitchPair a battery wall switch straight to a dimmer over Bluetooth — no gateway. Dimming with an input moduleDim one dimmer or twenty from one wired button, with no IP addresses to keep. LED strip control with ShellyDim an LED strip properly — and what to fit instead of a phase dimmer. Underfloor heating with ShellyControl water-based or electric underfloor heating, with a thermostat that works without the app. Heat pump control with ShellyRun an SG-Ready heat pump on your own solar surplus instead of exporting it. Radiator thermostat with Shelly BLU TRVPut existing water radiators on zone control, a few minutes per room, no wiring. Cover control with ShellyGet an awning, shutter or blind onto real position tracking, and calibration to pass. Garage door control with ShellyPut an existing garage door on the app without touching the motor — and check what the door itself must have before it runs unattended. Access control with ShellyAdd remote unlock and notifications to an existing lock, without replacing it. IHC to Shelly conversionReplace only the modules in the panel, and reuse the existing wiring and buttons. Shelly to Shelly without Wi-FiLink Shelly devices where there is no router — one device's access point is the network.